Runcam Swift 2 (Built in OSD) (2.1mm Lens) (BLACK) (5-36v)
If you’re looking for a serious upgrade for your FPV camera, the Runcam Swift 2 offers improved vibrance, clarity and contrast along with metal threading in the casing, which is a huge upgrade and industry request based on previous fragility by screwing into plastic nubbins. With our Swift 2, you get two cases with multiple mounting and height options, stubby 2.1mm lens upgrade at no additional cost, wide dynamic range, wide voltage range and a configurable OSD. All-in-all, the Swift 2 is looking like the best value in FPV cams to date.
2.1mm Runcam lens upgrade
Unlike most retailers who purchase the cam as-is from the manufacturer, knowing you’ll be unsatisfied with the lens included, we spend a little extra to get you the lens 80-90% of the industry prefers and eat that expense so we can offer our customers the best possible solution.
2 Cases / 2 backplates
One nice touch with the Swift 2 is the additional case with three height options and two backplate options. Break one case? No biggie, grab the other case, transfer the board and lens and you’re back to flying at no extra expense and little down time.
The bane of most pilot’s existence as it pertains to FPV cameras, has always been the manufacturer simply moulding nubbins for you to use self-tapping screws to hold your camera against the sideplate. My personal take on this is that the next step in the FPV camera evolution (aside from affordable HD) will be the manufacturing adjusting the design slightly and adhering o-rings or washers around the screw holes to aid in vibration dampening as well as assist in holding tilt position.
|Model||RunCam Swift 2|
|Image Sensor||1/3″ SONY Super HAD II CCD|
|Lens||2.5mm(Default) / 2.3mm / 2.1mm|
|S/N Ration||>60dB(AGC OFF)|
|Electronic Shutter Speed||PAL:1/50~100,000; NTSC:1/60~100,000|
|Back light compensation(BLC)||YES|
|Day/Night||Color / Auto / B&W|
|Power||DC 5 to 36V|
|Dimensions||28.5mm * 26mm * 26mm|