Aikon SEFM 30amp ESC (HW Version 3) (DShot)
Simply put, the Aikon SEFM 30amp ESC is one of the best ESC’s on the market today. It’s incredibly small, very efficient and very powerful and with the all new design and tweaks made to the latest batch produced, it’s clear that the focus has been broadened to both performance and extending longevity while being more forgiving when pushed to it’s limits using a variety of settings. This was necessary because the new trend in motors is to use extremely high-current stator sizes such as 2207 and to drive those motors, efficiently and to do so without compromising the mosfets, Aikon went to the next level and underwent a complete hardware redisign. They’re using bigger FET’s for better heat dissipation, and made layout improvements to aid in stability, both of which should make the Aikon SEFM 30amp ESC more efficient and powerful as well as add to its life expectancy.
DShot for Aikon SEFM 30amp ESC’s
Currently, a further leap forward is in development with the advent of Dshot, a potential protocol replacement for Multishot. Settings will be outlined once compatibility has been verified and testing is complete. Additionally, in order to make use of Dshot, you need to be running a board with firmware that supports DSHOT. Our Omnibus F4 boards have DSHOT compatibility and it appears that when combined with our Aikon’s, will handle up to 32Khz loop times. In addition to flashing the ESC’s with Dshot enabled firmware, you’ll need to flash one of the Betaflight targets, available HERE.
|Signal wire length||150mm|
|Battery wire length||100mm|
- Startup power: 0.25
- Timing: med-high
- Demag: high
- Min throttle: 1000
- Max throttle: 2000
- Max Temp: 110°C
Feel Free to check out it’s performance toting a yi. 5S starts at 2:12